I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/02/13, 06:00:43.262]: NMEA 1 - Opening serial port... Successful
[2024/02/13, 06:00:45.105]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/02/13, 06:00:45.105]: CR1
[2024/02/13, 06:00:45.215]: CR1

[Parameters set to FACTORY defaults]

>
[2024/02/13, 06:00:45.215]: TE00000000
[2024/02/13, 06:00:45.246]: TE00000000

>
[2024/02/13, 06:00:45.246]: -->Sending commands from ADCP command file...


[2024/02/13, 06:00:45.246]: cr1
[2024/02/13, 06:00:45.340]: cr1

[Parameters set to FACTORY defaults]

>
[2024/02/13, 06:00:45.340]: CF01110
[2024/02/13, 06:00:45.371]: CF01110

>
[2024/02/13, 06:00:45.371]: WB0
[2024/02/13, 06:00:45.402]: WB0

>
[2024/02/13, 06:00:45.402]: WP00001
[2024/02/13, 06:00:45.433]: WP00001

>
[2024/02/13, 06:00:45.433]: WN060
[2024/02/13, 06:00:45.465]: WN060

>
[2024/02/13, 06:00:45.465]: WS200
[2024/02/13, 06:00:45.512]: WS200

>
[2024/02/13, 06:00:45.512]: WF200
[2024/02/13, 06:00:45.543]: WF200

>
[2024/02/13, 06:00:45.543]: WV700
[2024/02/13, 06:00:45.558]: WV700

>
[2024/02/13, 06:00:45.558]: BP002
[2024/02/13, 06:00:45.590]: BP002

>
[2024/02/13, 06:00:45.590]: BX1200
[2024/02/13, 06:00:45.621]: BX1200

>
[2024/02/13, 06:00:45.621]: WD111100000
[2024/02/13, 06:00:45.668]: WD111100000

>
[2024/02/13, 06:00:45.683]: TP000050
[2024/02/13, 06:00:45.699]: TP000050

>
[2024/02/13, 06:00:45.699]: TE00000100
[2024/02/13, 06:00:45.746]: TE00000100

>
[2024/02/13, 06:00:45.746]: EZ1111101
[2024/02/13, 06:00:45.777]: EZ1111101

>
[2024/02/13, 06:00:45.777]: EX00000
[2024/02/13, 06:00:45.808]: EX00000

>
[2024/02/13, 06:00:45.808]: ED00030
[2024/02/13, 06:00:45.840]: ED00030

>
[2024/02/13, 06:00:45.840]: ES29
[2024/02/13, 06:00:45.871]: ES29

>
[2024/02/13, 06:00:45.871]: CK
[2024/02/13, 06:00:45.996]: CK

[Parameters saved as USER defaults]

>
[2024/02/13, 06:00:45.996]: cb411
[2024/02/13, 06:00:46.027]: cb411

>
[2024/02/13, 06:00:46.027]: -->Retrieving beam correction matrix...


[2024/02/13, 06:00:46.027]: PS3
[2024/02/13, 06:00:46.933]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/02/13, 06:00:46.933]: 
-->Setting manual ping mode...


[2024/02/13, 06:00:46.933]: CF?
[2024/02/13, 06:00:47.027]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/02/13, 06:00:47.027]: CF 01110
[2024/02/13, 06:00:47.058]: CF 01110

>
[2024/02/13, 06:00:47.058]: EA18000
[2024/02/13, 06:00:47.090]: EA18000

>
[2024/02/13, 06:00:47.090]: 
-->Setting beam radial output mode...


[2024/02/13, 06:00:47.090]: EX00000
[2024/02/13, 06:00:47.121]: EX00000

>
[2024/02/13, 06:00:48.012]: CS

[2024/02/13, 06:00:48.043]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/02/13, 06:00:48.043]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/02/13, 06:00:48.043]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/02/13, 19:06:03.967]: NMEA 1 - Error writing to raw data file
[2024/02/13, 19:06:03.982]: NMEA 1 - Receiving correct type of data
[2024/02/13, 19:06:03.998]: NMEA 1 - Error writing to raw data file