I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/02/19, 06:00:43.210]: NMEA 1 - Opening serial port... Successful
[2024/02/19, 06:00:45.054]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/02/19, 06:00:45.054]: CR1
[2024/02/19, 06:00:45.163]: CR1

[Parameters set to FACTORY defaults]

>
[2024/02/19, 06:00:45.163]: TE00000000
[2024/02/19, 06:00:45.210]: TE00000000

>
[2024/02/19, 06:00:45.210]: -->Sending commands from ADCP command file...


[2024/02/19, 06:00:45.210]: cr1
[2024/02/19, 06:00:45.288]: cr1

[Parameters set to FACTORY defaults]

>
[2024/02/19, 06:00:45.288]: CF01110
[2024/02/19, 06:00:45.320]: CF01110

>
[2024/02/19, 06:00:45.320]: WB0
[2024/02/19, 06:00:45.351]: WB0

>
[2024/02/19, 06:00:45.351]: WP00001
[2024/02/19, 06:00:45.382]: WP00001

>
[2024/02/19, 06:00:45.382]: WN060
[2024/02/19, 06:00:45.413]: WN060

>
[2024/02/19, 06:00:45.413]: WS200
[2024/02/19, 06:00:45.429]: WS200

>
[2024/02/19, 06:00:45.445]: WF200
[2024/02/19, 06:00:45.460]: WF200

>
[2024/02/19, 06:00:45.476]: WV700
[2024/02/19, 06:00:45.491]: WV700

>
[2024/02/19, 06:00:45.507]: BP002
[2024/02/19, 06:00:45.523]: BP002

>
[2024/02/19, 06:00:45.523]: BX1200
[2024/02/19, 06:00:45.554]: BX1200

>
[2024/02/19, 06:00:45.554]: WD111100000
[2024/02/19, 06:00:45.601]: WD111100000

>
[2024/02/19, 06:00:45.601]: TP000050
[2024/02/19, 06:00:45.648]: TP000050

>
[2024/02/19, 06:00:45.648]: TE00000100
[2024/02/19, 06:00:45.679]: TE00000100

>
[2024/02/19, 06:00:45.679]: EZ1111101
[2024/02/19, 06:00:45.710]: EZ1111101

>
[2024/02/19, 06:00:45.726]: EX00000
[2024/02/19, 06:00:45.757]: EX00000

>
[2024/02/19, 06:00:45.757]: ED00030
[2024/02/19, 06:00:45.788]: ED00030

>
[2024/02/19, 06:00:45.788]: ES29
[2024/02/19, 06:00:45.820]: ES29

>
[2024/02/19, 06:00:45.820]: CK
[2024/02/19, 06:00:45.945]: CK

[Parameters saved as USER defaults]

>
[2024/02/19, 06:00:45.945]: cb411
[2024/02/19, 06:00:45.976]: cb411

>
[2024/02/19, 06:00:45.976]: -->Retrieving beam correction matrix...


[2024/02/19, 06:00:45.976]: PS3
[2024/02/19, 06:00:46.882]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/02/19, 06:00:46.882]: 
-->Setting manual ping mode...


[2024/02/19, 06:00:46.882]: CF?
[2024/02/19, 06:00:46.991]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/02/19, 06:00:46.991]: CF 01110
[2024/02/19, 06:00:47.023]: CF 01110

>
[2024/02/19, 06:00:47.023]: EA18000
[2024/02/19, 06:00:47.054]: EA18000

>
[2024/02/19, 06:00:47.054]: 
-->Setting beam radial output mode...


[2024/02/19, 06:00:47.054]: EX00000
[2024/02/19, 06:00:47.085]: EX00000

>
[2024/02/19, 06:00:48.007]: CS

[2024/02/19, 06:00:48.038]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/02/19, 06:00:48.038]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/02/19, 06:00:48.038]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/02/19, 17:11:21.266]: NMEA 1 - Receiving too much data - Skipping some processing
[2024/02/19, 17:11:21.423]: NMEA 1 - Resuming full data processing