I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/03/20, 06:00:43.158]: NMEA 1 - Opening serial port... Successful
[2024/03/20, 06:00:45.002]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/03/20, 06:00:45.002]: CR1
[2024/03/20, 06:00:45.111]: CR1

[Parameters set to FACTORY defaults]

>
[2024/03/20, 06:00:45.111]: TE00000000
[2024/03/20, 06:00:45.142]: TE00000000

>
[2024/03/20, 06:00:45.158]: -->Sending commands from ADCP command file...


[2024/03/20, 06:00:45.158]: cr1
[2024/03/20, 06:00:45.236]: cr1

[Parameters set to FACTORY defaults]

>
[2024/03/20, 06:00:45.236]: CF01110
[2024/03/20, 06:00:45.252]: CF01110

>
[2024/03/20, 06:00:45.252]: WB0
[2024/03/20, 06:00:45.283]: WB0

>
[2024/03/20, 06:00:45.283]: WP00001
[2024/03/20, 06:00:45.330]: WP00001

>
[2024/03/20, 06:00:45.330]: WN060
[2024/03/20, 06:00:45.345]: WN060

>
[2024/03/20, 06:00:45.345]: WS200
[2024/03/20, 06:00:45.377]: WS200

>
[2024/03/20, 06:00:45.377]: WF200
[2024/03/20, 06:00:45.408]: WF200

>
[2024/03/20, 06:00:45.408]: WV700
[2024/03/20, 06:00:45.439]: WV700

>
[2024/03/20, 06:00:45.439]: BP002
[2024/03/20, 06:00:45.470]: BP002

>
[2024/03/20, 06:00:45.470]: BX1200
[2024/03/20, 06:00:45.502]: BX1200

>
[2024/03/20, 06:00:45.502]: WD111100000
[2024/03/20, 06:00:45.549]: WD111100000

>
[2024/03/20, 06:00:45.549]: TP000050
[2024/03/20, 06:00:45.580]: TP000050

>
[2024/03/20, 06:00:45.580]: TE00000100
[2024/03/20, 06:00:45.611]: TE00000100

>
[2024/03/20, 06:00:45.611]: EZ1111101
[2024/03/20, 06:00:45.658]: EZ1111101

>
[2024/03/20, 06:00:45.658]: EX00000
[2024/03/20, 06:00:45.689]: EX00000

>
[2024/03/20, 06:00:45.689]: ED00030
[2024/03/20, 06:00:45.720]: ED00030

>
[2024/03/20, 06:00:45.720]: ES29
[2024/03/20, 06:00:45.752]: ES29

>
[2024/03/20, 06:00:45.752]: CK
[2024/03/20, 06:00:45.877]: CK

[Parameters saved as USER defaults]

>
[2024/03/20, 06:00:45.877]: cb411
[2024/03/20, 06:00:45.908]: cb411

>
[2024/03/20, 06:00:45.908]: -->Retrieving beam correction matrix...


[2024/03/20, 06:00:45.908]: PS3
[2024/03/20, 06:00:46.830]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/03/20, 06:00:46.830]: 
-->Setting manual ping mode...


[2024/03/20, 06:00:46.830]: CF?
[2024/03/20, 06:00:46.924]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/03/20, 06:00:46.924]: CF 01110
[2024/03/20, 06:00:46.955]: CF 01110

>
[2024/03/20, 06:00:46.971]: EA18000
[2024/03/20, 06:00:46.986]: EA18000

>
[2024/03/20, 06:00:46.986]: 
-->Setting beam radial output mode...


[2024/03/20, 06:00:46.986]: EX00000
[2024/03/20, 06:00:47.033]: EX00000

>
[2024/03/20, 06:00:48.002]: CS

[2024/03/20, 06:00:48.033]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/03/20, 06:00:48.033]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/03/20, 06:00:48.033]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/03/20, 13:45:58.692]: NMEA 1 - Error writing to raw data file
[2024/03/20, 13:45:58.707]: NMEA 1 - Receiving correct type of data
[2024/03/20, 13:45:58.738]: NMEA 1 - Error writing to raw data file