I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/03/27, 06:00:43.393]: NMEA 1 - Opening serial port... Successful
[2024/03/27, 06:00:45.237]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/03/27, 06:00:45.237]: CR1
[2024/03/27, 06:00:45.331]: CR1

[Parameters set to FACTORY defaults]

>
[2024/03/27, 06:00:45.331]: TE00000000
[2024/03/27, 06:00:45.378]: TE00000000

>
[2024/03/27, 06:00:45.378]: -->Sending commands from ADCP command file...


[2024/03/27, 06:00:45.378]: cr1
[2024/03/27, 06:00:45.456]: cr1

[Parameters set to FACTORY defaults]

>
[2024/03/27, 06:00:45.456]: CF01110
[2024/03/27, 06:00:45.487]: CF01110

>
[2024/03/27, 06:00:45.487]: WB0
[2024/03/27, 06:00:45.518]: WB0

>
[2024/03/27, 06:00:45.518]: WP00001
[2024/03/27, 06:00:45.550]: WP00001

>
[2024/03/27, 06:00:45.550]: WN060
[2024/03/27, 06:00:45.581]: WN060

>
[2024/03/27, 06:00:45.581]: WS200
[2024/03/27, 06:00:45.596]: WS200

>
[2024/03/27, 06:00:45.612]: WF200
[2024/03/27, 06:00:45.643]: WF200

>
[2024/03/27, 06:00:45.643]: WV700
[2024/03/27, 06:00:45.674]: WV700

>
[2024/03/27, 06:00:45.674]: BP002
[2024/03/27, 06:00:45.690]: BP002

>
[2024/03/27, 06:00:45.690]: BX1200
[2024/03/27, 06:00:45.721]: BX1200

>
[2024/03/27, 06:00:45.721]: WD111100000
[2024/03/27, 06:00:45.753]: WD111100000

>
[2024/03/27, 06:00:45.753]: TP000050
[2024/03/27, 06:00:45.799]: TP000050

>
[2024/03/27, 06:00:45.799]: TE00000100
[2024/03/27, 06:00:45.831]: TE00000100

>
[2024/03/27, 06:00:45.831]: EZ1111101
[2024/03/27, 06:00:45.862]: EZ1111101

>
[2024/03/27, 06:00:45.862]: EX00000
[2024/03/27, 06:00:45.893]: EX00000

>
[2024/03/27, 06:00:45.893]: ED00030
[2024/03/27, 06:00:45.940]: ED00030

>
[2024/03/27, 06:00:45.940]: ES29
[2024/03/27, 06:00:45.956]: ES29

>
[2024/03/27, 06:00:45.971]: CK
[2024/03/27, 06:00:46.096]: CK

[Parameters saved as USER defaults]

>
[2024/03/27, 06:00:46.096]: cb411
[2024/03/27, 06:00:46.128]: cb411

>
[2024/03/27, 06:00:46.128]: -->Retrieving beam correction matrix...


[2024/03/27, 06:00:46.128]: PS3
[2024/03/27, 06:00:47.034]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/03/27, 06:00:47.034]: 
-->Setting manual ping mode...


[2024/03/27, 06:00:47.034]: CF?
[2024/03/27, 06:00:47.143]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/03/27, 06:00:47.143]: CF 01110
[2024/03/27, 06:00:47.175]: CF 01110

>
[2024/03/27, 06:00:47.175]: EA18000
[2024/03/27, 06:00:47.206]: EA18000

>
[2024/03/27, 06:00:47.206]: 
-->Setting beam radial output mode...


[2024/03/27, 06:00:47.206]: EX00000
[2024/03/27, 06:00:47.237]: EX00000

>
[2024/03/27, 06:00:48.003]: CS

[2024/03/27, 06:00:48.034]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/03/27, 06:00:48.034]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/03/27, 06:00:48.034]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/03/27, 22:36:06.645]: NMEA 1 - Error writing to raw data file
[2024/03/27, 22:36:06.661]: NMEA 1 - Receiving correct type of data
[2024/03/27, 22:36:06.677]: NMEA 1 - Error writing to raw data file