I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/04/19, 06:00:42.444]: NMEA 1 - Opening serial port... Successful
[2024/04/19, 06:00:44.265]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/04/19, 06:00:44.265]: CR1
[2024/04/19, 06:00:44.374]: CR1

[Parameters set to FACTORY defaults]

>
[2024/04/19, 06:00:44.374]: TE00000000
[2024/04/19, 06:00:44.421]: TE00000000

>
[2024/04/19, 06:00:44.421]: -->Sending commands from ADCP command file...


[2024/04/19, 06:00:44.421]: cr1
[2024/04/19, 06:00:44.499]: cr1

[Parameters set to FACTORY defaults]

>
[2024/04/19, 06:00:44.499]: CF01110
[2024/04/19, 06:00:44.530]: CF01110

>
[2024/04/19, 06:00:44.530]: WB0
[2024/04/19, 06:00:44.561]: WB0

>
[2024/04/19, 06:00:44.561]: WP00001
[2024/04/19, 06:00:44.592]: WP00001

>
[2024/04/19, 06:00:44.592]: WN060
[2024/04/19, 06:00:44.623]: WN060

>
[2024/04/19, 06:00:44.623]: WS200
[2024/04/19, 06:00:44.654]: WS200

>
[2024/04/19, 06:00:44.654]: WF200
[2024/04/19, 06:00:44.685]: WF200

>
[2024/04/19, 06:00:44.685]: WV700
[2024/04/19, 06:00:44.716]: WV700

>
[2024/04/19, 06:00:44.716]: BP002
[2024/04/19, 06:00:44.732]: BP002

>
[2024/04/19, 06:00:44.732]: BX1200
[2024/04/19, 06:00:44.763]: BX1200

>
[2024/04/19, 06:00:44.763]: WD111100000
[2024/04/19, 06:00:44.794]: WD111100000

>
[2024/04/19, 06:00:44.794]: TP000050
[2024/04/19, 06:00:44.841]: TP000050

>
[2024/04/19, 06:00:44.841]: TE00000100
[2024/04/19, 06:00:44.888]: TE00000100

>
[2024/04/19, 06:00:44.888]: EZ1111101
[2024/04/19, 06:00:44.919]: EZ1111101

>
[2024/04/19, 06:00:44.919]: EX00000
[2024/04/19, 06:00:44.950]: EX00000

>
[2024/04/19, 06:00:44.950]: ED00030
[2024/04/19, 06:00:44.981]: ED00030

>
[2024/04/19, 06:00:44.981]: ES29
[2024/04/19, 06:00:44.997]: ES29

>
[2024/04/19, 06:00:44.997]: CK
[2024/04/19, 06:00:45.152]: CK

[Parameters saved as USER defaults]

>
[2024/04/19, 06:00:45.152]: cb411
[2024/04/19, 06:00:45.183]: cb411

>
[2024/04/19, 06:00:45.183]: -->Retrieving beam correction matrix...


[2024/04/19, 06:00:45.183]: PS3
[2024/04/19, 06:00:46.086]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/04/19, 06:00:46.086]: 
-->Setting manual ping mode...


[2024/04/19, 06:00:46.086]: CF?
[2024/04/19, 06:00:46.179]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/04/19, 06:00:46.179]: CF 01110
[2024/04/19, 06:00:46.211]: CF 01110

>
[2024/04/19, 06:00:46.211]: EA18000
[2024/04/19, 06:00:46.257]: EA18000

>
[2024/04/19, 06:00:46.257]: 
-->Setting beam radial output mode...


[2024/04/19, 06:00:46.257]: EX00000
[2024/04/19, 06:00:46.288]: EX00000

>
[2024/04/19, 06:00:47.004]: CS

[2024/04/19, 06:00:47.035]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/04/19, 06:00:47.035]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/04/19, 06:00:47.035]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/04/19, 06:08:24.260]: NMEA 1 - Error writing to raw data file
[2024/04/19, 06:08:24.276]: NMEA 1 - Receiving correct type of data
[2024/04/19, 06:08:24.291]: NMEA 1 - Error writing to raw data file