I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/05/12, 06:03:45.303]: NMEA 1 - Opening serial port... Successful
[2024/05/12, 06:03:47.146]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/05/12, 06:03:47.146]: CR1
[2024/05/12, 06:03:47.256]: CR1

[Parameters set to FACTORY defaults]

>
[2024/05/12, 06:03:47.256]: TE00000000
[2024/05/12, 06:03:47.303]: TE00000000

>
[2024/05/12, 06:03:47.303]: -->Sending commands from ADCP command file...


[2024/05/12, 06:03:47.303]: cr1
[2024/05/12, 06:03:47.381]: cr1

[Parameters set to FACTORY defaults]

>
[2024/05/12, 06:03:47.381]: CF01110
[2024/05/12, 06:03:47.412]: CF01110

>
[2024/05/12, 06:03:47.412]: WB0
[2024/05/12, 06:03:47.443]: WB0

>
[2024/05/12, 06:03:47.443]: WP00001
[2024/05/12, 06:03:47.490]: WP00001

>
[2024/05/12, 06:03:47.490]: WN060
[2024/05/12, 06:03:47.506]: WN060

>
[2024/05/12, 06:03:47.521]: WS200
[2024/05/12, 06:03:47.537]: WS200

>
[2024/05/12, 06:03:47.537]: WF200
[2024/05/12, 06:03:47.568]: WF200

>
[2024/05/12, 06:03:47.568]: WV700
[2024/05/12, 06:03:47.600]: WV700

>
[2024/05/12, 06:03:47.600]: BP002
[2024/05/12, 06:03:47.631]: BP002

>
[2024/05/12, 06:03:47.631]: BX1200
[2024/05/12, 06:03:47.662]: BX1200

>
[2024/05/12, 06:03:47.662]: WD111100000
[2024/05/12, 06:03:47.693]: WD111100000

>
[2024/05/12, 06:03:47.709]: TP000050
[2024/05/12, 06:03:47.740]: TP000050

>
[2024/05/12, 06:03:47.740]: TE00000100
[2024/05/12, 06:03:47.787]: TE00000100

>
[2024/05/12, 06:03:47.787]: EZ1111101
[2024/05/12, 06:03:47.818]: EZ1111101

>
[2024/05/12, 06:03:47.818]: EX00000
[2024/05/12, 06:03:47.850]: EX00000

>
[2024/05/12, 06:03:47.850]: ED00030
[2024/05/12, 06:03:47.881]: ED00030

>
[2024/05/12, 06:03:47.881]: ES29
[2024/05/12, 06:03:47.896]: ES29

>
[2024/05/12, 06:03:47.912]: CK
[2024/05/12, 06:03:48.021]: CK

[Parameters saved as USER defaults]

>
[2024/05/12, 06:03:48.068]: cb411
[2024/05/12, 06:03:48.115]: cb411

>
[2024/05/12, 06:03:48.131]: -->Retrieving beam correction matrix...


[2024/05/12, 06:03:48.131]: PS3
[2024/05/12, 06:03:49.037]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/05/12, 06:03:49.037]: 
-->Setting manual ping mode...


[2024/05/12, 06:03:49.068]: CF?
[2024/05/12, 06:03:49.178]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/05/12, 06:03:49.178]: CF 01110
[2024/05/12, 06:03:49.193]: CF 01110

>
[2024/05/12, 06:03:49.209]: EA18000
[2024/05/12, 06:03:49.240]: EA18000

>
[2024/05/12, 06:03:49.240]: 
-->Setting beam radial output mode...


[2024/05/12, 06:03:49.240]: EX00000
[2024/05/12, 06:03:49.272]: EX00000

>
[2024/05/12, 06:03:50.006]: CS

[2024/05/12, 06:03:50.022]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/05/12, 06:03:50.022]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/05/12, 06:03:50.022]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/05/12, 08:57:32.487]: NMEA 1 - Error writing to raw data file
[2024/05/12, 08:57:32.503]: NMEA 1 - Receiving correct type of data
[2024/05/12, 08:57:32.550]: NMEA 1 - Error writing to raw data file