I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/05/13, 06:03:45.245]: NMEA 1 - Opening serial port... Successful
[2024/05/13, 06:03:47.073]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/05/13, 06:03:47.073]: CR1
[2024/05/13, 06:03:47.183]: CR1

[Parameters set to FACTORY defaults]

>
[2024/05/13, 06:03:47.183]: TE00000000
[2024/05/13, 06:03:47.214]: TE00000000

>
[2024/05/13, 06:03:47.214]: -->Sending commands from ADCP command file...


[2024/05/13, 06:03:47.214]: cr1
[2024/05/13, 06:03:47.308]: cr1

[Parameters set to FACTORY defaults]

>
[2024/05/13, 06:03:47.308]: CF01110
[2024/05/13, 06:03:47.323]: CF01110

>
[2024/05/13, 06:03:47.323]: WB0
[2024/05/13, 06:03:47.354]: WB0

>
[2024/05/13, 06:03:47.354]: WP00001
[2024/05/13, 06:03:47.386]: WP00001

>
[2024/05/13, 06:03:47.386]: WN060
[2024/05/13, 06:03:47.417]: WN060

>
[2024/05/13, 06:03:47.417]: WS200
[2024/05/13, 06:03:47.448]: WS200

>
[2024/05/13, 06:03:47.448]: WF200
[2024/05/13, 06:03:47.479]: WF200

>
[2024/05/13, 06:03:47.479]: WV700
[2024/05/13, 06:03:47.511]: WV700

>
[2024/05/13, 06:03:47.511]: BP002
[2024/05/13, 06:03:47.542]: BP002

>
[2024/05/13, 06:03:47.542]: BX1200
[2024/05/13, 06:03:47.573]: BX1200

>
[2024/05/13, 06:03:47.573]: WD111100000
[2024/05/13, 06:03:47.620]: WD111100000

>
[2024/05/13, 06:03:47.620]: TP000050
[2024/05/13, 06:03:47.651]: TP000050

>
[2024/05/13, 06:03:47.651]: TE00000100
[2024/05/13, 06:03:47.683]: TE00000100

>
[2024/05/13, 06:03:47.683]: EZ1111101
[2024/05/13, 06:03:47.729]: EZ1111101

>
[2024/05/13, 06:03:47.729]: EX00000
[2024/05/13, 06:03:47.761]: EX00000

>
[2024/05/13, 06:03:47.761]: ED00030
[2024/05/13, 06:03:47.808]: ED00030

>
[2024/05/13, 06:03:47.808]: ES29
[2024/05/13, 06:03:47.823]: ES29

>
[2024/05/13, 06:03:47.823]: CK
[2024/05/13, 06:03:47.948]: CK

[Parameters saved as USER defaults]

>
[2024/05/13, 06:03:47.948]: cb411
[2024/05/13, 06:03:47.979]: cb411

>
[2024/05/13, 06:03:47.979]: -->Retrieving beam correction matrix...


[2024/05/13, 06:03:47.979]: PS3
[2024/05/13, 06:03:48.901]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/05/13, 06:03:48.901]: 
-->Setting manual ping mode...


[2024/05/13, 06:03:48.901]: CF?
[2024/05/13, 06:03:48.995]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/05/13, 06:03:48.995]: CF 01110
[2024/05/13, 06:03:49.026]: CF 01110

>
[2024/05/13, 06:03:49.026]: EA18000
[2024/05/13, 06:03:49.073]: EA18000

>
[2024/05/13, 06:03:49.073]: 
-->Setting beam radial output mode...


[2024/05/13, 06:03:49.073]: EX00000
[2024/05/13, 06:03:49.105]: EX00000

>
[2024/05/13, 06:03:50.011]: CS

[2024/05/13, 06:03:50.042]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/05/13, 06:03:50.042]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/05/13, 06:03:50.042]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/05/13, 06:04:57.793]: NMEA 1 - Error writing to raw data file
[2024/05/13, 06:04:57.809]: NMEA 1 - Receiving correct type of data
[2024/05/13, 06:04:57.840]: NMEA 1 - Error writing to raw data file