I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/09/29, 06:04:44.356]: NMEA 1 - Opening serial port... Successful
[2024/09/29, 06:04:46.199]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/09/29, 06:04:46.199]: CR1
[2024/09/29, 06:04:46.277]: CR1

[Parameters set to FACTORY defaults]

>
[2024/09/29, 06:04:46.277]: TE00000000
[2024/09/29, 06:04:46.309]: TE00000000

>
[2024/09/29, 06:04:46.309]: -->Sending commands from ADCP command file...


[2024/09/29, 06:04:46.309]: cr1
[2024/09/29, 06:04:46.387]: cr1

[Parameters set to FACTORY defaults]

>
[2024/09/29, 06:04:46.387]: CF01110
[2024/09/29, 06:04:46.418]: CF01110

>
[2024/09/29, 06:04:46.418]: WB0
[2024/09/29, 06:04:46.449]: WB0

>
[2024/09/29, 06:04:46.449]: WP00001
[2024/09/29, 06:04:46.481]: WP00001

>
[2024/09/29, 06:04:46.481]: WN060
[2024/09/29, 06:04:46.512]: WN060

>
[2024/09/29, 06:04:46.512]: WS200
[2024/09/29, 06:04:46.543]: WS200

>
[2024/09/29, 06:04:46.543]: WF200
[2024/09/29, 06:04:46.574]: WF200

>
[2024/09/29, 06:04:46.574]: WV700
[2024/09/29, 06:04:46.606]: WV700

>
[2024/09/29, 06:04:46.606]: BP002
[2024/09/29, 06:04:46.637]: BP002

>
[2024/09/29, 06:04:46.637]: BX1200
[2024/09/29, 06:04:46.668]: BX1200

>
[2024/09/29, 06:04:46.668]: WD111100000
[2024/09/29, 06:04:46.699]: WD111100000

>
[2024/09/29, 06:04:46.699]: TP000050
[2024/09/29, 06:04:46.746]: TP000050

>
[2024/09/29, 06:04:46.746]: TE00000100
[2024/09/29, 06:04:46.777]: TE00000100

>
[2024/09/29, 06:04:46.777]: EZ1111101
[2024/09/29, 06:04:46.824]: EZ1111101

>
[2024/09/29, 06:04:46.824]: EX00000
[2024/09/29, 06:04:46.856]: EX00000

>
[2024/09/29, 06:04:46.856]: ED00030
[2024/09/29, 06:04:46.887]: ED00030

>
[2024/09/29, 06:04:46.887]: ES29
[2024/09/29, 06:04:46.902]: ES29

>
[2024/09/29, 06:04:46.902]: CK
[2024/09/29, 06:04:47.027]: CK

[Parameters saved as USER defaults]

>
[2024/09/29, 06:04:47.027]: cb411
[2024/09/29, 06:04:47.059]: cb411

>
[2024/09/29, 06:04:47.059]: -->Retrieving beam correction matrix...


[2024/09/29, 06:04:47.074]: PS3
[2024/09/29, 06:04:47.981]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/09/29, 06:04:47.981]: 
-->Setting manual ping mode...


[2024/09/29, 06:04:47.981]: CF?
[2024/09/29, 06:04:48.074]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/09/29, 06:04:48.074]: CF 01110
[2024/09/29, 06:04:48.106]: CF 01110

>
[2024/09/29, 06:04:48.106]: EA18000
[2024/09/29, 06:04:48.137]: EA18000

>
[2024/09/29, 06:04:48.137]: 
-->Setting beam radial output mode...


[2024/09/29, 06:04:48.137]: EX00000
[2024/09/29, 06:04:48.168]: EX00000

>
[2024/09/29, 06:04:49.012]: CS

[2024/09/29, 06:04:49.043]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/09/29, 06:04:49.043]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/09/29, 06:04:49.043]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/09/29, 08:47:45.814]: NMEA 1 - Error writing to raw data file
[2024/09/29, 08:47:45.829]: NMEA 1 - Receiving correct type of data
[2024/09/29, 08:47:45.845]: NMEA 1 - Error writing to raw data file