I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/10/01, 06:04:45.881]: NMEA 1 - Opening serial port... Successful
[2024/10/01, 06:04:47.709]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/10/01, 06:04:47.709]: CR1
[2024/10/01, 06:04:47.819]: CR1

[Parameters set to FACTORY defaults]

>
[2024/10/01, 06:04:47.819]: TE00000000
[2024/10/01, 06:04:47.850]: TE00000000

>
[2024/10/01, 06:04:47.850]: -->Sending commands from ADCP command file...


[2024/10/01, 06:04:47.850]: cr1
[2024/10/01, 06:04:47.928]: cr1

[Parameters set to FACTORY defaults]

>
[2024/10/01, 06:04:47.928]: CF01110
[2024/10/01, 06:04:47.959]: CF01110

>
[2024/10/01, 06:04:47.959]: WB0
[2024/10/01, 06:04:47.991]: WB0

>
[2024/10/01, 06:04:47.991]: WP00001
[2024/10/01, 06:04:48.022]: WP00001

>
[2024/10/01, 06:04:48.022]: WN060
[2024/10/01, 06:04:48.053]: WN060

>
[2024/10/01, 06:04:48.053]: WS200
[2024/10/01, 06:04:48.084]: WS200

>
[2024/10/01, 06:04:48.084]: WF200
[2024/10/01, 06:04:48.116]: WF200

>
[2024/10/01, 06:04:48.116]: WV700
[2024/10/01, 06:04:48.147]: WV700

>
[2024/10/01, 06:04:48.147]: BP002
[2024/10/01, 06:04:48.178]: BP002

>
[2024/10/01, 06:04:48.178]: BX1200
[2024/10/01, 06:04:48.209]: BX1200

>
[2024/10/01, 06:04:48.209]: WD111100000
[2024/10/01, 06:04:48.241]: WD111100000

>
[2024/10/01, 06:04:48.241]: TP000050
[2024/10/01, 06:04:48.288]: TP000050

>
[2024/10/01, 06:04:48.288]: TE00000100
[2024/10/01, 06:04:48.319]: TE00000100

>
[2024/10/01, 06:04:48.319]: EZ1111101
[2024/10/01, 06:04:48.350]: EZ1111101

>
[2024/10/01, 06:04:48.350]: EX00000
[2024/10/01, 06:04:48.381]: EX00000

>
[2024/10/01, 06:04:48.381]: ED00030
[2024/10/01, 06:04:48.428]: ED00030

>
[2024/10/01, 06:04:48.428]: ES29
[2024/10/01, 06:04:48.444]: ES29

>
[2024/10/01, 06:04:48.444]: CK
[2024/10/01, 06:04:48.569]: CK

[Parameters saved as USER defaults]

>
[2024/10/01, 06:04:48.569]: cb411
[2024/10/01, 06:04:48.600]: cb411

>
[2024/10/01, 06:04:48.600]: -->Retrieving beam correction matrix...


[2024/10/01, 06:04:48.600]: PS3
[2024/10/01, 06:04:49.506]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/10/01, 06:04:49.506]: 
-->Setting manual ping mode...


[2024/10/01, 06:04:49.506]: CF?
[2024/10/01, 06:04:49.600]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/10/01, 06:04:49.616]: CF 01110
[2024/10/01, 06:04:49.647]: CF 01110

>
[2024/10/01, 06:04:49.647]: EA18000
[2024/10/01, 06:04:49.678]: EA18000

>
[2024/10/01, 06:04:49.678]: 
-->Setting beam radial output mode...


[2024/10/01, 06:04:49.678]: EX00000
[2024/10/01, 06:04:49.709]: EX00000

>
[2024/10/01, 06:04:50.006]: CS

[2024/10/01, 06:04:50.038]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/10/01, 06:04:50.038]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/10/01, 06:04:50.038]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/10/01, 06:14:07.378]: NMEA 1 - Error writing to raw data file
[2024/10/01, 06:14:07.441]: NMEA 1 - Receiving correct type of data
[2024/10/01, 06:14:07.456]: NMEA 1 - Error writing to raw data file