I/O log for Teledyne RDI VmDas Version 1.46.5

[2024/12/27, 06:00:44.483]: NMEA 1 - Opening serial port... Successful
[2024/12/27, 06:00:46.311]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2024/12/27, 06:00:46.311]: CR1
[2024/12/27, 06:00:46.420]: CR1

[Parameters set to FACTORY defaults]

>
[2024/12/27, 06:00:46.420]: TE00000000
[2024/12/27, 06:00:46.467]: TE00000000

>
[2024/12/27, 06:00:46.467]: -->Sending commands from ADCP command file...


[2024/12/27, 06:00:46.467]: cr1
[2024/12/27, 06:00:46.545]: cr1

[Parameters set to FACTORY defaults]

>
[2024/12/27, 06:00:46.545]: CF01110
[2024/12/27, 06:00:46.592]: CF01110

>
[2024/12/27, 06:00:46.592]: WB0
[2024/12/27, 06:00:46.608]: WB0

>
[2024/12/27, 06:00:46.608]: WP00001
[2024/12/27, 06:00:46.655]: WP00001

>
[2024/12/27, 06:00:46.655]: WN060
[2024/12/27, 06:00:46.686]: WN060

>
[2024/12/27, 06:00:46.686]: WS200
[2024/12/27, 06:00:46.717]: WS200

>
[2024/12/27, 06:00:46.717]: WF200
[2024/12/27, 06:00:46.749]: WF200

>
[2024/12/27, 06:00:46.749]: WV700
[2024/12/27, 06:00:46.780]: WV700

>
[2024/12/27, 06:00:46.780]: BP002
[2024/12/27, 06:00:46.811]: BP002

>
[2024/12/27, 06:00:46.827]: BX1200
[2024/12/27, 06:00:46.858]: BX1200

>
[2024/12/27, 06:00:46.858]: WD111100000
[2024/12/27, 06:00:46.889]: WD111100000

>
[2024/12/27, 06:00:46.889]: TP000050
[2024/12/27, 06:00:46.920]: TP000050

>
[2024/12/27, 06:00:46.920]: TE00000100
[2024/12/27, 06:00:46.967]: TE00000100

>
[2024/12/27, 06:00:46.967]: EZ1111101
[2024/12/27, 06:00:46.999]: EZ1111101

>
[2024/12/27, 06:00:46.999]: EX00000
[2024/12/27, 06:00:47.045]: EX00000

>
[2024/12/27, 06:00:47.045]: ED00030
[2024/12/27, 06:00:47.077]: ED00030

>
[2024/12/27, 06:00:47.077]: ES29
[2024/12/27, 06:00:47.108]: ES29

>
[2024/12/27, 06:00:47.108]: CK
[2024/12/27, 06:00:47.233]: CK

[Parameters saved as USER defaults]

>
[2024/12/27, 06:00:47.233]: cb411
[2024/12/27, 06:00:47.264]: cb411

>
[2024/12/27, 06:00:47.264]: -->Retrieving beam correction matrix...


[2024/12/27, 06:00:47.264]: PS3
[2024/12/27, 06:00:48.186]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2024/12/27, 06:00:48.186]: 
-->Setting manual ping mode...


[2024/12/27, 06:00:48.186]: CF?
[2024/12/27, 06:00:48.280]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2024/12/27, 06:00:48.280]: CF 01110
[2024/12/27, 06:00:48.311]: CF 01110

>
[2024/12/27, 06:00:48.311]: EA18000
[2024/12/27, 06:00:48.358]: EA18000

>
[2024/12/27, 06:00:48.358]: 
-->Setting beam radial output mode...


[2024/12/27, 06:00:48.358]: EX00000
[2024/12/27, 06:00:48.389]: EX00000

>
[2024/12/27, 06:00:49.014]: CS

[2024/12/27, 06:00:49.046]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2024/12/27, 06:00:49.046]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2024/12/27, 06:00:49.046]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2024/12/27, 23:45:07.080]: NMEA 1 - Receiving too much data - Skipping some processing
[2024/12/27, 23:45:07.830]: NMEA 1 - Resuming full data processing