I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/01/03, 06:00:44.593]: NMEA 1 - Opening serial port... Successful
[2025/01/03, 06:00:46.421]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/01/03, 06:00:46.421]: CR1
[2025/01/03, 06:00:46.531]: CR1

[Parameters set to FACTORY defaults]

>
[2025/01/03, 06:00:46.531]: TE00000000
[2025/01/03, 06:00:46.578]: TE00000000

>
[2025/01/03, 06:00:46.578]: -->Sending commands from ADCP command file...


[2025/01/03, 06:00:46.578]: cr1
[2025/01/03, 06:00:46.656]: cr1

[Parameters set to FACTORY defaults]

>
[2025/01/03, 06:00:46.656]: CF01110
[2025/01/03, 06:00:46.687]: CF01110

>
[2025/01/03, 06:00:46.687]: WB0
[2025/01/03, 06:00:46.718]: WB0

>
[2025/01/03, 06:00:46.718]: WP00001
[2025/01/03, 06:00:46.750]: WP00001

>
[2025/01/03, 06:00:46.750]: WN060
[2025/01/03, 06:00:46.781]: WN060

>
[2025/01/03, 06:00:46.781]: WS200
[2025/01/03, 06:00:46.812]: WS200

>
[2025/01/03, 06:00:46.812]: WF200
[2025/01/03, 06:00:46.843]: WF200

>
[2025/01/03, 06:00:46.843]: WV700
[2025/01/03, 06:00:46.875]: WV700

>
[2025/01/03, 06:00:46.875]: BP002
[2025/01/03, 06:00:46.906]: BP002

>
[2025/01/03, 06:00:46.906]: BX1200
[2025/01/03, 06:00:46.937]: BX1200

>
[2025/01/03, 06:00:46.937]: WD111100000
[2025/01/03, 06:00:46.984]: WD111100000

>
[2025/01/03, 06:00:46.984]: TP000050
[2025/01/03, 06:00:47.000]: TP000050

>
[2025/01/03, 06:00:47.015]: TE00000100
[2025/01/03, 06:00:47.046]: TE00000100

>
[2025/01/03, 06:00:47.046]: EZ1111101
[2025/01/03, 06:00:47.093]: EZ1111101

>
[2025/01/03, 06:00:47.093]: EX00000
[2025/01/03, 06:00:47.125]: EX00000

>
[2025/01/03, 06:00:47.125]: ED00030
[2025/01/03, 06:00:47.171]: ED00030

>
[2025/01/03, 06:00:47.171]: ES29
[2025/01/03, 06:00:47.203]: ES29

>
[2025/01/03, 06:00:47.203]: CK
[2025/01/03, 06:00:47.328]: CK

[Parameters saved as USER defaults]

>
[2025/01/03, 06:00:47.328]: cb411
[2025/01/03, 06:00:47.359]: cb411

>
[2025/01/03, 06:00:47.359]: -->Retrieving beam correction matrix...


[2025/01/03, 06:00:47.359]: PS3
[2025/01/03, 06:00:48.281]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/01/03, 06:00:48.281]: 
-->Setting manual ping mode...


[2025/01/03, 06:00:48.281]: CF?
[2025/01/03, 06:00:48.375]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/01/03, 06:00:48.375]: CF 01110
[2025/01/03, 06:00:48.406]: CF 01110

>
[2025/01/03, 06:00:48.406]: EA18000
[2025/01/03, 06:00:48.437]: EA18000

>
[2025/01/03, 06:00:48.437]: 
-->Setting beam radial output mode...


[2025/01/03, 06:00:48.437]: EX00000
[2025/01/03, 06:00:48.484]: EX00000

>
[2025/01/03, 06:00:49.015]: CS

[2025/01/03, 06:00:49.046]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/01/03, 06:00:49.046]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/01/03, 06:00:49.046]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/01/03, 23:45:27.603]: NMEA 1 - Receiving too much data - Skipping some processing
[2025/01/03, 23:45:29.650]: GGA data is now unavailable from its primary source
[2025/01/03, 23:45:29.650]: GGA data can now be read from its primary source
[2025/01/03, 23:45:31.103]: NMEA 1 - Resuming full data processing