I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/01/30, 06:00:44.716]: NMEA 1 - Opening serial port... Successful
[2025/01/30, 06:00:46.560]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/01/30, 06:00:46.560]: CR1
[2025/01/30, 06:00:46.653]: CR1

[Parameters set to FACTORY defaults]

>
[2025/01/30, 06:00:46.669]: TE00000000
[2025/01/30, 06:00:46.700]: TE00000000

>
[2025/01/30, 06:00:46.700]: -->Sending commands from ADCP command file...


[2025/01/30, 06:00:46.700]: cr1
[2025/01/30, 06:00:46.779]: cr1

[Parameters set to FACTORY defaults]

>
[2025/01/30, 06:00:46.779]: CF01110
[2025/01/30, 06:00:46.825]: CF01110

>
[2025/01/30, 06:00:46.825]: WB0
[2025/01/30, 06:00:46.857]: WB0

>
[2025/01/30, 06:00:46.857]: WP00001
[2025/01/30, 06:00:46.903]: WP00001

>
[2025/01/30, 06:00:46.903]: WN060
[2025/01/30, 06:00:46.935]: WN060

>
[2025/01/30, 06:00:46.935]: WS200
[2025/01/30, 06:00:46.966]: WS200

>
[2025/01/30, 06:00:46.966]: WF200
[2025/01/30, 06:00:46.997]: WF200

>
[2025/01/30, 06:00:46.997]: WV700
[2025/01/30, 06:00:47.028]: WV700

>
[2025/01/30, 06:00:47.028]: BP002
[2025/01/30, 06:00:47.060]: BP002

>
[2025/01/30, 06:00:47.060]: BX1200
[2025/01/30, 06:00:47.091]: BX1200

>
[2025/01/30, 06:00:47.091]: WD111100000
[2025/01/30, 06:00:47.122]: WD111100000

>
[2025/01/30, 06:00:47.122]: TP000050
[2025/01/30, 06:00:47.153]: TP000050

>
[2025/01/30, 06:00:47.153]: TE00000100
[2025/01/30, 06:00:47.200]: TE00000100

>
[2025/01/30, 06:00:47.200]: EZ1111101
[2025/01/30, 06:00:47.232]: EZ1111101

>
[2025/01/30, 06:00:47.232]: EX00000
[2025/01/30, 06:00:47.263]: EX00000

>
[2025/01/30, 06:00:47.263]: ED00030
[2025/01/30, 06:00:47.294]: ED00030

>
[2025/01/30, 06:00:47.294]: ES29
[2025/01/30, 06:00:47.325]: ES29

>
[2025/01/30, 06:00:47.325]: CK
[2025/01/30, 06:00:47.466]: CK

[Parameters saved as USER defaults]

>
[2025/01/30, 06:00:47.466]: cb411
[2025/01/30, 06:00:47.497]: cb411

>
[2025/01/30, 06:00:47.497]: -->Retrieving beam correction matrix...


[2025/01/30, 06:00:47.497]: PS3
[2025/01/30, 06:00:48.403]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/01/30, 06:00:48.403]: 
-->Setting manual ping mode...


[2025/01/30, 06:00:48.403]: CF?
[2025/01/30, 06:00:48.497]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/01/30, 06:00:48.497]: CF 01110
[2025/01/30, 06:00:48.544]: CF 01110

>
[2025/01/30, 06:00:48.544]: EA18000
[2025/01/30, 06:00:48.575]: EA18000

>
[2025/01/30, 06:00:48.575]: 
-->Setting beam radial output mode...


[2025/01/30, 06:00:48.575]: EX00000
[2025/01/30, 06:00:48.622]: EX00000

>
[2025/01/30, 06:00:49.013]: CS

[2025/01/30, 06:00:49.044]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/01/30, 06:00:49.044]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/01/30, 06:00:49.044]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/01/30, 23:45:16.244]: NMEA 1 - Receiving too much data - Skipping some processing
[2025/01/30, 23:45:17.822]: NMEA 1 - Resuming full data processing