I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/02/20, 06:00:44.493]: NMEA 1 - Opening serial port... Successful
[2025/02/20, 06:00:46.321]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/02/20, 06:00:46.321]: CR1
[2025/02/20, 06:00:46.446]: CR1

[Parameters set to FACTORY defaults]

>
[2025/02/20, 06:00:46.461]: TE00000000
[2025/02/20, 06:00:46.493]: TE00000000

>
[2025/02/20, 06:00:46.493]: -->Sending commands from ADCP command file...


[2025/02/20, 06:00:46.493]: cr1
[2025/02/20, 06:00:46.571]: cr1

[Parameters set to FACTORY defaults]

>
[2025/02/20, 06:00:46.571]: CF01110
[2025/02/20, 06:00:46.602]: CF01110

>
[2025/02/20, 06:00:46.602]: WB0
[2025/02/20, 06:00:46.633]: WB0

>
[2025/02/20, 06:00:46.633]: WP00001
[2025/02/20, 06:00:46.664]: WP00001

>
[2025/02/20, 06:00:46.664]: WN060
[2025/02/20, 06:00:46.696]: WN060

>
[2025/02/20, 06:00:46.696]: WS200
[2025/02/20, 06:00:46.711]: WS200

>
[2025/02/20, 06:00:46.727]: WF200
[2025/02/20, 06:00:46.743]: WF200

>
[2025/02/20, 06:00:46.743]: WV700
[2025/02/20, 06:00:46.774]: WV700

>
[2025/02/20, 06:00:46.774]: BP002
[2025/02/20, 06:00:46.805]: BP002

>
[2025/02/20, 06:00:46.805]: BX1200
[2025/02/20, 06:00:46.836]: BX1200

>
[2025/02/20, 06:00:46.836]: WD111100000
[2025/02/20, 06:00:46.868]: WD111100000

>
[2025/02/20, 06:00:46.868]: TP000050
[2025/02/20, 06:00:46.899]: TP000050

>
[2025/02/20, 06:00:46.899]: TE00000100
[2025/02/20, 06:00:46.946]: TE00000100

>
[2025/02/20, 06:00:46.946]: EZ1111101
[2025/02/20, 06:00:46.977]: EZ1111101

>
[2025/02/20, 06:00:46.977]: EX00000
[2025/02/20, 06:00:47.008]: EX00000

>
[2025/02/20, 06:00:47.008]: ED00030
[2025/02/20, 06:00:47.055]: ED00030

>
[2025/02/20, 06:00:47.055]: ES29
[2025/02/20, 06:00:47.071]: ES29

>
[2025/02/20, 06:00:47.071]: CK
[2025/02/20, 06:00:47.196]: CK

[Parameters saved as USER defaults]

>
[2025/02/20, 06:00:47.196]: cb411
[2025/02/20, 06:00:47.227]: cb411

>
[2025/02/20, 06:00:47.227]: -->Retrieving beam correction matrix...


[2025/02/20, 06:00:47.227]: PS3
[2025/02/20, 06:00:48.149]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/02/20, 06:00:48.149]: 
-->Setting manual ping mode...


[2025/02/20, 06:00:48.149]: CF?
[2025/02/20, 06:00:48.243]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/02/20, 06:00:48.243]: CF 01110
[2025/02/20, 06:00:48.289]: CF 01110

>
[2025/02/20, 06:00:48.289]: EA18000
[2025/02/20, 06:00:48.305]: EA18000

>
[2025/02/20, 06:00:48.305]: 
-->Setting beam radial output mode...


[2025/02/20, 06:00:48.305]: EX00000
[2025/02/20, 06:00:48.336]: EX00000

>
[2025/02/20, 06:00:49.008]: CS

[2025/02/20, 06:00:49.039]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/02/20, 06:00:49.039]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/02/20, 06:00:49.039]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/02/20, 15:04:50.468]: NMEA 1 - Receiving too much data - Skipping some processing
[2025/02/20, 15:04:52.155]: NMEA 1 - Resuming full data processing