I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/03/05, 06:00:44.699]: NMEA 1 - Opening serial port... Successful
[2025/03/05, 06:00:46.511]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/03/05, 06:00:46.511]: CR1
[2025/03/05, 06:00:46.620]: CR1

[Parameters set to FACTORY defaults]

>
[2025/03/05, 06:00:46.620]: TE00000000
[2025/03/05, 06:00:46.667]: TE00000000

>
[2025/03/05, 06:00:46.667]: -->Sending commands from ADCP command file...


[2025/03/05, 06:00:46.667]: cr1
[2025/03/05, 06:00:46.745]: cr1

[Parameters set to FACTORY defaults]

>
[2025/03/05, 06:00:46.745]: CF01110
[2025/03/05, 06:00:46.777]: CF01110

>
[2025/03/05, 06:00:46.777]: WB0
[2025/03/05, 06:00:46.808]: WB0

>
[2025/03/05, 06:00:46.808]: WP00001
[2025/03/05, 06:00:46.839]: WP00001

>
[2025/03/05, 06:00:46.839]: WN060
[2025/03/05, 06:00:46.870]: WN060

>
[2025/03/05, 06:00:46.870]: WS200
[2025/03/05, 06:00:46.902]: WS200

>
[2025/03/05, 06:00:46.902]: WF200
[2025/03/05, 06:00:46.949]: WF200

>
[2025/03/05, 06:00:46.949]: WV700
[2025/03/05, 06:00:46.980]: WV700

>
[2025/03/05, 06:00:46.980]: BP002
[2025/03/05, 06:00:47.011]: BP002

>
[2025/03/05, 06:00:47.011]: BX1200
[2025/03/05, 06:00:47.042]: BX1200

>
[2025/03/05, 06:00:47.042]: WD111100000
[2025/03/05, 06:00:47.074]: WD111100000

>
[2025/03/05, 06:00:47.074]: TP000050
[2025/03/05, 06:00:47.105]: TP000050

>
[2025/03/05, 06:00:47.105]: TE00000100
[2025/03/05, 06:00:47.152]: TE00000100

>
[2025/03/05, 06:00:47.152]: EZ1111101
[2025/03/05, 06:00:47.183]: EZ1111101

>
[2025/03/05, 06:00:47.183]: EX00000
[2025/03/05, 06:00:47.230]: EX00000

>
[2025/03/05, 06:00:47.230]: ED00030
[2025/03/05, 06:00:47.261]: ED00030

>
[2025/03/05, 06:00:47.261]: ES29
[2025/03/05, 06:00:47.292]: ES29

>
[2025/03/05, 06:00:47.292]: CK
[2025/03/05, 06:00:47.417]: CK

[Parameters saved as USER defaults]

>
[2025/03/05, 06:00:47.417]: cb411
[2025/03/05, 06:00:47.449]: cb411

>
[2025/03/05, 06:00:47.449]: -->Retrieving beam correction matrix...


[2025/03/05, 06:00:47.449]: PS3
[2025/03/05, 06:00:48.386]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/03/05, 06:00:48.386]: 
-->Setting manual ping mode...


[2025/03/05, 06:00:48.386]: CF?
[2025/03/05, 06:00:48.605]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/03/05, 06:00:48.605]: CF 01110
[2025/03/05, 06:00:48.652]: CF 01110

>
[2025/03/05, 06:00:48.652]: EA18000
[2025/03/05, 06:00:48.683]: EA18000

>
[2025/03/05, 06:00:48.683]: 
-->Setting beam radial output mode...


[2025/03/05, 06:00:48.683]: EX00000
[2025/03/05, 06:00:48.714]: EX00000

>
[2025/03/05, 06:00:49.011]: CS

[2025/03/05, 06:00:49.042]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/03/05, 06:00:49.042]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/03/05, 06:00:49.042]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/03/05, 14:26:22.832]: NMEA 1 - Receiving too much data - Skipping some processing
[2025/03/05, 14:26:23.770]: NMEA 1 - Resuming full data processing