I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/04/04, 06:00:45.565]: NMEA 1 - Opening serial port... Successful
[2025/04/04, 06:00:47.393]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/04/04, 06:00:47.393]: CR1
[2025/04/04, 06:00:47.518]: CR1

[Parameters set to FACTORY defaults]

>
[2025/04/04, 06:00:47.518]: TE00000000
[2025/04/04, 06:00:47.549]: TE00000000

>
[2025/04/04, 06:00:47.549]: -->Sending commands from ADCP command file...


[2025/04/04, 06:00:47.549]: cr1
[2025/04/04, 06:00:47.643]: cr1

[Parameters set to FACTORY defaults]

>
[2025/04/04, 06:00:47.643]: CF01110
[2025/04/04, 06:00:47.674]: CF01110

>
[2025/04/04, 06:00:47.674]: WB0
[2025/04/04, 06:00:47.690]: WB0

>
[2025/04/04, 06:00:47.690]: WP00001
[2025/04/04, 06:00:47.737]: WP00001

>
[2025/04/04, 06:00:47.737]: WN060
[2025/04/04, 06:00:47.752]: WN060

>
[2025/04/04, 06:00:47.752]: WS200
[2025/04/04, 06:00:47.784]: WS200

>
[2025/04/04, 06:00:47.784]: WF200
[2025/04/04, 06:00:47.815]: WF200

>
[2025/04/04, 06:00:47.815]: WV700
[2025/04/04, 06:00:47.846]: WV700

>
[2025/04/04, 06:00:47.846]: BP002
[2025/04/04, 06:00:47.877]: BP002

>
[2025/04/04, 06:00:47.877]: BX1200
[2025/04/04, 06:00:47.909]: BX1200

>
[2025/04/04, 06:00:47.909]: WD111100000
[2025/04/04, 06:00:47.940]: WD111100000

>
[2025/04/04, 06:00:47.940]: TP000050
[2025/04/04, 06:00:47.971]: TP000050

>
[2025/04/04, 06:00:47.971]: TE00000100
[2025/04/04, 06:00:48.018]: TE00000100

>
[2025/04/04, 06:00:48.018]: EZ1111101
[2025/04/04, 06:00:48.049]: EZ1111101

>
[2025/04/04, 06:00:48.049]: EX00000
[2025/04/04, 06:00:48.081]: EX00000

>
[2025/04/04, 06:00:48.081]: ED00030
[2025/04/04, 06:00:48.112]: ED00030

>
[2025/04/04, 06:00:48.112]: ES29
[2025/04/04, 06:00:48.159]: ES29

>
[2025/04/04, 06:00:48.159]: CK
[2025/04/04, 06:00:48.284]: CK

[Parameters saved as USER defaults]

>
[2025/04/04, 06:00:48.284]: cb411
[2025/04/04, 06:00:48.315]: cb411

>
[2025/04/04, 06:00:48.315]: -->Retrieving beam correction matrix...


[2025/04/04, 06:00:48.315]: PS3
[2025/04/04, 06:00:49.237]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/04/04, 06:00:49.237]: 
-->Setting manual ping mode...


[2025/04/04, 06:00:49.237]: CF?
[2025/04/04, 06:00:49.331]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/04/04, 06:00:49.331]: CF 01110
[2025/04/04, 06:00:49.362]: CF 01110

>
[2025/04/04, 06:00:49.362]: EA18000
[2025/04/04, 06:00:49.393]: EA18000

>
[2025/04/04, 06:00:49.393]: 
-->Setting beam radial output mode...


[2025/04/04, 06:00:49.393]: EX00000
[2025/04/04, 06:00:49.424]: EX00000

>
[2025/04/04, 06:00:50.002]: CS

[2025/04/04, 06:00:50.034]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/04/04, 06:00:50.034]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/04/04, 06:00:50.034]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/04/04, 23:45:12.816]: GGA data is now unavailable from its primary source
[2025/04/04, 23:45:12.910]: GGA data can now be read from its primary source