I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/05/03, 06:00:44.368]: NMEA 1 - Opening serial port... Successful
[2025/05/03, 06:00:46.196]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/05/03, 06:00:46.196]: CR1
[2025/05/03, 06:00:46.306]: CR1

[Parameters set to FACTORY defaults]

>
[2025/05/03, 06:00:46.306]: TE00000000
[2025/05/03, 06:00:46.337]: TE00000000

>
[2025/05/03, 06:00:46.337]: -->Sending commands from ADCP command file...


[2025/05/03, 06:00:46.337]: cr1
[2025/05/03, 06:00:46.415]: cr1

[Parameters set to FACTORY defaults]

>
[2025/05/03, 06:00:46.431]: CF01110
[2025/05/03, 06:00:46.462]: CF01110

>
[2025/05/03, 06:00:46.462]: WB0
[2025/05/03, 06:00:46.493]: WB0

>
[2025/05/03, 06:00:46.493]: WP00001
[2025/05/03, 06:00:46.524]: WP00001

>
[2025/05/03, 06:00:46.524]: WN060
[2025/05/03, 06:00:46.556]: WN060

>
[2025/05/03, 06:00:46.556]: WS200
[2025/05/03, 06:00:46.587]: WS200

>
[2025/05/03, 06:00:46.587]: WF200
[2025/05/03, 06:00:46.618]: WF200

>
[2025/05/03, 06:00:46.618]: WV700
[2025/05/03, 06:00:46.649]: WV700

>
[2025/05/03, 06:00:46.649]: BP002
[2025/05/03, 06:00:46.665]: BP002

>
[2025/05/03, 06:00:46.665]: BX1200
[2025/05/03, 06:00:46.696]: BX1200

>
[2025/05/03, 06:00:46.696]: WD111100000
[2025/05/03, 06:00:46.727]: WD111100000

>
[2025/05/03, 06:00:46.727]: TP000050
[2025/05/03, 06:00:46.774]: TP000050

>
[2025/05/03, 06:00:46.774]: TE00000100
[2025/05/03, 06:00:46.821]: TE00000100

>
[2025/05/03, 06:00:46.821]: EZ1111101
[2025/05/03, 06:00:46.852]: EZ1111101

>
[2025/05/03, 06:00:46.852]: EX00000
[2025/05/03, 06:00:46.899]: EX00000

>
[2025/05/03, 06:00:46.899]: ED00030
[2025/05/03, 06:00:46.931]: ED00030

>
[2025/05/03, 06:00:46.931]: ES29
[2025/05/03, 06:00:46.962]: ES29

>
[2025/05/03, 06:00:46.962]: CK
[2025/05/03, 06:00:47.087]: CK

[Parameters saved as USER defaults]

>
[2025/05/03, 06:00:47.087]: cb411
[2025/05/03, 06:00:47.118]: cb411

>
[2025/05/03, 06:00:47.118]: -->Retrieving beam correction matrix...


[2025/05/03, 06:00:47.118]: PS3
[2025/05/03, 06:00:48.024]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/05/03, 06:00:48.024]: 
-->Setting manual ping mode...


[2025/05/03, 06:00:48.024]: CF?
[2025/05/03, 06:00:48.118]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/05/03, 06:00:48.118]: CF 01110
[2025/05/03, 06:00:48.149]: CF 01110

>
[2025/05/03, 06:00:48.149]: EA18000
[2025/05/03, 06:00:48.181]: EA18000

>
[2025/05/03, 06:00:48.181]: 
-->Setting beam radial output mode...


[2025/05/03, 06:00:48.181]: EX00000
[2025/05/03, 06:00:48.212]: EX00000

>
[2025/05/03, 06:00:49.009]: CS

[2025/05/03, 06:00:49.024]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/05/03, 06:00:49.024]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/05/03, 06:00:49.024]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/05/03, 16:00:14.207]: NMEA 1 - Receiving too much data - Skipping some processing
[2025/05/03, 16:00:14.848]: NMEA 1 - Resuming full data processing