I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/06/11, 06:00:43.723]: NMEA 1 - Opening serial port... Successful
[2025/06/11, 06:00:45.614]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/06/11, 06:00:45.629]: CR1
[2025/06/11, 06:00:45.754]: CR1

[Parameters set to FACTORY defaults]

>
[2025/06/11, 06:00:45.754]: TE00000000
[2025/06/11, 06:00:45.801]: TE00000000

>
[2025/06/11, 06:00:45.801]: -->Sending commands from ADCP command file...


[2025/06/11, 06:00:45.817]: cr1
[2025/06/11, 06:00:45.911]: cr1

[Parameters set to FACTORY defaults]

>
[2025/06/11, 06:00:45.926]: CF01110
[2025/06/11, 06:00:45.957]: CF01110

>
[2025/06/11, 06:00:45.973]: WB0
[2025/06/11, 06:00:46.020]: WB0

>
[2025/06/11, 06:00:46.036]: WP00001
[2025/06/11, 06:00:46.067]: WP00001

>
[2025/06/11, 06:00:46.082]: WN060
[2025/06/11, 06:00:46.129]: WN060

>
[2025/06/11, 06:00:46.145]: WS200
[2025/06/11, 06:00:46.192]: WS200

>
[2025/06/11, 06:00:46.207]: WF200
[2025/06/11, 06:00:46.239]: WF200

>
[2025/06/11, 06:00:46.254]: WV700
[2025/06/11, 06:00:46.301]: WV700

>
[2025/06/11, 06:00:46.317]: BP002
[2025/06/11, 06:00:46.364]: BP002

>
[2025/06/11, 06:00:46.364]: BX1200
[2025/06/11, 06:00:46.395]: BX1200

>
[2025/06/11, 06:00:46.411]: WD111100000
[2025/06/11, 06:00:46.457]: WD111100000

>
[2025/06/11, 06:00:46.473]: TP000050
[2025/06/11, 06:00:46.520]: TP000050

>
[2025/06/11, 06:00:46.536]: TE00000100
[2025/06/11, 06:00:46.582]: TE00000100

>
[2025/06/11, 06:00:46.598]: EZ1111101
[2025/06/11, 06:00:46.645]: EZ1111101

>
[2025/06/11, 06:00:46.661]: EX00000
[2025/06/11, 06:00:46.692]: EX00000

>
[2025/06/11, 06:00:46.692]: ED00030
[2025/06/11, 06:00:46.739]: ED00030

>
[2025/06/11, 06:00:46.739]: ES29
[2025/06/11, 06:00:46.786]: ES29

>
[2025/06/11, 06:00:46.786]: CK
[2025/06/11, 06:00:46.926]: CK

[Parameters saved as USER defaults]

>
[2025/06/11, 06:00:46.942]: cb411
[2025/06/11, 06:00:46.973]: cb411

>
[2025/06/11, 06:00:46.989]: -->Retrieving beam correction matrix...


[2025/06/11, 06:00:47.004]: PS3
[2025/06/11, 06:00:47.926]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/06/11, 06:00:47.926]: 
-->Setting manual ping mode...


[2025/06/11, 06:00:47.942]: CF?
[2025/06/11, 06:00:48.051]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/06/11, 06:00:48.067]: CF 01110
[2025/06/11, 06:00:48.098]: CF 01110

>
[2025/06/11, 06:00:48.114]: EA18000
[2025/06/11, 06:00:48.145]: EA18000

>
[2025/06/11, 06:00:48.161]: 
-->Setting beam radial output mode...


[2025/06/11, 06:00:48.176]: EX00000
[2025/06/11, 06:00:48.223]: EX00000

>
[2025/06/11, 06:00:49.005]: CS

[2025/06/11, 06:00:49.051]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/06/11, 06:00:49.067]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/06/11, 06:00:49.082]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/06/11, 07:00:47.946]: NMEA 1 - Error writing to raw data file
[2025/06/11, 07:00:47.977]: NMEA 1 - Receiving correct type of data
[2025/06/11, 07:00:47.993]: NMEA 1 - Error writing to raw data file