I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/07/01, 06:00:44.671]: NMEA 1 - Opening serial port... Successful
[2025/07/01, 06:00:46.515]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/07/01, 06:00:46.530]: CR1
[2025/07/01, 06:00:46.640]: CR1

[Parameters set to FACTORY defaults]

>
[2025/07/01, 06:00:46.655]: TE00000000
[2025/07/01, 06:00:46.687]: TE00000000

>
[2025/07/01, 06:00:46.702]: -->Sending commands from ADCP command file...


[2025/07/01, 06:00:46.702]: cr1
[2025/07/01, 06:00:46.796]: cr1

[Parameters set to FACTORY defaults]

>
[2025/07/01, 06:00:46.796]: CF01110
[2025/07/01, 06:00:46.843]: CF01110

>
[2025/07/01, 06:00:46.858]: WB0
[2025/07/01, 06:00:46.890]: WB0

>
[2025/07/01, 06:00:46.905]: WP00001
[2025/07/01, 06:00:46.937]: WP00001

>
[2025/07/01, 06:00:46.952]: WN060
[2025/07/01, 06:00:46.999]: WN060

>
[2025/07/01, 06:00:46.999]: WS200
[2025/07/01, 06:00:47.046]: WS200

>
[2025/07/01, 06:00:47.046]: WF200
[2025/07/01, 06:00:47.093]: WF200

>
[2025/07/01, 06:00:47.109]: WV700
[2025/07/01, 06:00:47.140]: WV700

>
[2025/07/01, 06:00:47.155]: BP002
[2025/07/01, 06:00:47.202]: BP002

>
[2025/07/01, 06:00:47.202]: BX1200
[2025/07/01, 06:00:47.249]: BX1200

>
[2025/07/01, 06:00:47.249]: WD111100000
[2025/07/01, 06:00:47.312]: WD111100000

>
[2025/07/01, 06:00:47.327]: TP000050
[2025/07/01, 06:00:47.374]: TP000050

>
[2025/07/01, 06:00:47.390]: TE00000100
[2025/07/01, 06:00:47.437]: TE00000100

>
[2025/07/01, 06:00:47.452]: EZ1111101
[2025/07/01, 06:00:47.499]: EZ1111101

>
[2025/07/01, 06:00:47.515]: EX00000
[2025/07/01, 06:00:47.546]: EX00000

>
[2025/07/01, 06:00:47.562]: ED00030
[2025/07/01, 06:00:47.593]: ED00030

>
[2025/07/01, 06:00:47.609]: ES29
[2025/07/01, 06:00:47.640]: ES29

>
[2025/07/01, 06:00:47.655]: CK
[2025/07/01, 06:00:47.796]: CK

[Parameters saved as USER defaults]

>
[2025/07/01, 06:00:47.796]: cb411
[2025/07/01, 06:00:47.843]: cb411

>
[2025/07/01, 06:00:47.843]: -->Retrieving beam correction matrix...


[2025/07/01, 06:00:47.859]: PS3
[2025/07/01, 06:00:48.780]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/07/01, 06:00:48.780]: 
-->Setting manual ping mode...


[2025/07/01, 06:00:48.796]: CF?
[2025/07/01, 06:00:48.905]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/07/01, 06:00:48.905]: CF 01110
[2025/07/01, 06:00:48.937]: CF 01110

>
[2025/07/01, 06:00:48.952]: EA18000
[2025/07/01, 06:00:48.999]: EA18000

>
[2025/07/01, 06:00:49.015]: 
-->Setting beam radial output mode...


[2025/07/01, 06:00:49.030]: EX00000
[2025/07/01, 06:00:49.062]: EX00000

>
[2025/07/01, 06:00:50.015]: CS

[2025/07/01, 06:00:50.077]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/07/01, 06:00:50.093]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/07/01, 06:00:50.109]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/07/01, 07:00:42.166]: NMEA 1 - Error writing to raw data file
[2025/07/01, 07:00:42.260]: NMEA 1 - Receiving correct type of data
[2025/07/01, 07:00:42.260]: NMEA 1 - Error writing to raw data file