I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/07/15, 06:00:46.510]: NMEA 1 - Opening serial port... Successful
[2025/07/15, 06:00:48.354]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/07/15, 06:00:48.369]: CR1
[2025/07/15, 06:00:48.479]: CR1

[Parameters set to FACTORY defaults]

>
[2025/07/15, 06:00:48.494]: TE00000000
[2025/07/15, 06:00:48.541]: TE00000000

>
[2025/07/15, 06:00:48.557]: -->Sending commands from ADCP command file...


[2025/07/15, 06:00:48.557]: cr1
[2025/07/15, 06:00:48.651]: cr1

[Parameters set to FACTORY defaults]

>
[2025/07/15, 06:00:48.666]: CF01110
[2025/07/15, 06:00:48.697]: CF01110

>
[2025/07/15, 06:00:48.713]: WB0
[2025/07/15, 06:00:48.760]: WB0

>
[2025/07/15, 06:00:48.760]: WP00001
[2025/07/15, 06:00:48.807]: WP00001

>
[2025/07/15, 06:00:48.822]: WN060
[2025/07/15, 06:00:48.854]: WN060

>
[2025/07/15, 06:00:48.869]: WS200
[2025/07/15, 06:00:48.901]: WS200

>
[2025/07/15, 06:00:48.916]: WF200
[2025/07/15, 06:00:48.963]: WF200

>
[2025/07/15, 06:00:48.979]: WV700
[2025/07/15, 06:00:49.026]: WV700

>
[2025/07/15, 06:00:49.041]: BP002
[2025/07/15, 06:00:49.072]: BP002

>
[2025/07/15, 06:00:49.072]: BX1200
[2025/07/15, 06:00:49.119]: BX1200

>
[2025/07/15, 06:00:49.135]: WD111100000
[2025/07/15, 06:00:49.182]: WD111100000

>
[2025/07/15, 06:00:49.197]: TP000050
[2025/07/15, 06:00:49.229]: TP000050

>
[2025/07/15, 06:00:49.244]: TE00000100
[2025/07/15, 06:00:49.291]: TE00000100

>
[2025/07/15, 06:00:49.307]: EZ1111101
[2025/07/15, 06:00:49.354]: EZ1111101

>
[2025/07/15, 06:00:49.369]: EX00000
[2025/07/15, 06:00:49.401]: EX00000

>
[2025/07/15, 06:00:49.416]: ED00030
[2025/07/15, 06:00:49.463]: ED00030

>
[2025/07/15, 06:00:49.463]: ES29
[2025/07/15, 06:00:49.494]: ES29

>
[2025/07/15, 06:00:49.510]: CK
[2025/07/15, 06:00:49.651]: CK

[Parameters saved as USER defaults]

>
[2025/07/15, 06:00:49.682]: cb411
[2025/07/15, 06:00:49.713]: cb411

>
[2025/07/15, 06:00:49.729]: -->Retrieving beam correction matrix...


[2025/07/15, 06:00:49.776]: PS3
[2025/07/15, 06:00:50.682]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/07/15, 06:00:50.697]: 
-->Setting manual ping mode...


[2025/07/15, 06:00:50.697]: CF?
[2025/07/15, 06:00:50.807]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/07/15, 06:00:50.822]: CF 01110
[2025/07/15, 06:00:50.869]: CF 01110

>
[2025/07/15, 06:00:50.869]: EA18000
[2025/07/15, 06:00:50.901]: EA18000

>
[2025/07/15, 06:00:50.916]: 
-->Setting beam radial output mode...


[2025/07/15, 06:00:50.932]: EX00000
[2025/07/15, 06:00:50.979]: EX00000

>
[2025/07/15, 06:00:51.010]: CS

[2025/07/15, 06:00:51.072]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/07/15, 06:00:51.088]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/07/15, 06:00:51.104]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/07/15, 06:23:31.962]: NMEA 1 - Error writing to raw data file
[2025/07/15, 06:23:31.993]: NMEA 1 - Receiving correct type of data
[2025/07/15, 06:23:32.024]: NMEA 1 - Error writing to raw data file