I/O log for Teledyne RDI VmDas Version 1.46.5

[2025/07/16, 06:00:44.612]: NMEA 1 - Opening serial port... Successful
[2025/07/16, 06:00:46.456]: 

[BREAK Wakeup A]

WorkHorse Broadband ADCP Version 51.40

Teledyne RD Instruments (c) 1996-2010

All Rights Reserved.

>
[2025/07/16, 06:00:46.471]: CR1
[2025/07/16, 06:00:46.596]: CR1

[Parameters set to FACTORY defaults]

>
[2025/07/16, 06:00:46.596]: TE00000000
[2025/07/16, 06:00:46.643]: TE00000000

>
[2025/07/16, 06:00:46.659]: -->Sending commands from ADCP command file...


[2025/07/16, 06:00:46.659]: cr1
[2025/07/16, 06:00:46.753]: cr1

[Parameters set to FACTORY defaults]

>
[2025/07/16, 06:00:46.768]: CF01110
[2025/07/16, 06:00:46.799]: CF01110

>
[2025/07/16, 06:00:46.815]: WB0
[2025/07/16, 06:00:46.846]: WB0

>
[2025/07/16, 06:00:46.846]: WP00001
[2025/07/16, 06:00:46.878]: WP00001

>
[2025/07/16, 06:00:46.909]: WN060
[2025/07/16, 06:00:46.940]: WN060

>
[2025/07/16, 06:00:46.956]: WS200
[2025/07/16, 06:00:46.987]: WS200

>
[2025/07/16, 06:00:46.987]: WF200
[2025/07/16, 06:00:47.018]: WF200

>
[2025/07/16, 06:00:47.034]: WV700
[2025/07/16, 06:00:47.065]: WV700

>
[2025/07/16, 06:00:47.081]: BP002
[2025/07/16, 06:00:47.112]: BP002

>
[2025/07/16, 06:00:47.128]: BX1200
[2025/07/16, 06:00:47.159]: BX1200

>
[2025/07/16, 06:00:47.174]: WD111100000
[2025/07/16, 06:00:47.237]: WD111100000

>
[2025/07/16, 06:00:47.237]: TP000050
[2025/07/16, 06:00:47.284]: TP000050

>
[2025/07/16, 06:00:47.299]: TE00000100
[2025/07/16, 06:00:47.346]: TE00000100

>
[2025/07/16, 06:00:47.346]: EZ1111101
[2025/07/16, 06:00:47.393]: EZ1111101

>
[2025/07/16, 06:00:47.409]: EX00000
[2025/07/16, 06:00:47.456]: EX00000

>
[2025/07/16, 06:00:47.471]: ED00030
[2025/07/16, 06:00:47.503]: ED00030

>
[2025/07/16, 06:00:47.518]: ES29
[2025/07/16, 06:00:47.549]: ES29

>
[2025/07/16, 06:00:47.565]: CK
[2025/07/16, 06:00:47.690]: CK

[Parameters saved as USER defaults]

>
[2025/07/16, 06:00:47.706]: cb411
[2025/07/16, 06:00:47.753]: cb411

>
[2025/07/16, 06:00:47.753]: -->Retrieving beam correction matrix...


[2025/07/16, 06:00:47.768]: PS3
[2025/07/16, 06:00:48.674]: PS3

Beam Width:   3.7 degrees



Beam     Elevation     Azimuth

  1         -70.00      270.00

  2         -70.00       90.00

  3         -70.00        0.01

  4         -70.00      180.00



Beam Directional Matrix (Down):

  0.3420    0.0000    0.9397    0.2419  

 -0.3420    0.0000    0.9397    0.2419  

  0.0000   -0.3420    0.9397   -0.2419  

  0.0000    0.3420    0.9397   -0.2419  



Instrument Transformation Matrix (Down):    Q14:

  1.4619   -1.4619    0.0000    0.0000       23952  -23952       0       0  

  0.0000    0.0000   -1.4619    1.4619           0       0  -23952   23952  

  0.2661    0.2661    0.2661    0.2661        4359    4359    4359    4359  

  1.0337    1.0337   -1.0337   -1.0337       16936   16936  -16936  -16936  

Beam Angle Corrections Are Loaded.

>
[2025/07/16, 06:00:48.690]: 
-->Setting manual ping mode...


[2025/07/16, 06:00:48.706]: CF?
[2025/07/16, 06:00:48.799]: CF?

CF = 01110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2025/07/16, 06:00:48.815]: CF 01110
[2025/07/16, 06:00:48.846]: CF 01110

>
[2025/07/16, 06:00:48.862]: EA18000
[2025/07/16, 06:00:48.909]: EA18000

>
[2025/07/16, 06:00:48.924]: 
-->Setting beam radial output mode...


[2025/07/16, 06:00:48.940]: EX00000
[2025/07/16, 06:00:48.971]: EX00000

>
[2025/07/16, 06:00:49.003]: CS

[2025/07/16, 06:00:49.049]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2025/07/16, 06:00:49.065]: PRIMARY VTG data will be stored in the NAV field starting with ens 1
[2025/07/16, 06:00:49.081]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2025/07/16, 06:01:39.144]: NMEA 1 - Error writing to raw data file
[2025/07/16, 06:01:39.175]: NMEA 1 - Receiving correct type of data
[2025/07/16, 06:01:39.190]: NMEA 1 - Error writing to raw data file